| Cost | Affordable |
|---|---|
| Application | Manufacturing |
| Injection Pressure | 100-200 MPa |
| Emphasize | Injection Molding Solution |
| Mold Type | Single Cavity |
| Tolerance | ±0.1mm |
|---|---|
| Material | Plastic |
| Mold Temperature | 150-200°C |
| Cycle Time | 30-60 Seconds |
| Injection Speed | High |
| Tolerance | ±0.1mm |
|---|---|
| Cooling Time | 5-10 Seconds |
| Molding Process | Injection Molding |
| Material | Plastic |
| Injection Pressure | 100-200 MPa |
| Emphasize | Injection Molding Solution |
|---|---|
| Packaging Details | As the customer required |
| Delivery Time | 30day |
| Payment Terms | T/T |
| Supply Ability | More than 1 million |
| Tolerance | ±0.1mm |
|---|---|
| Injection Pressure | 100-200 MPa |
| Application | Manufacturing |
| Production Volume | Large |
| Mold Temperature | 150-200°C |
| Mold Temperature | 150-200°C |
|---|---|
| Cost | Affordable |
| Mold Type | Single Cavity |
| Surface Finish | Smooth |
| Production Volume | Large |
| Emphasize | I. Burr (or Flying Edge, Overflow, Overflow) : Reason: The Occurrence Of Burr Is Caused By The Overflow Of Molten Injection Resin From The Mold Parting Surface, Which Is The Worst State In The Forming Operation. Especially When The Burr Is Firmly Adhered |
|---|---|
| Packaging Details | As the customer required |
| Delivery Time | 30day |
| Payment Terms | T/T |
| Supply Ability | More than 1 million |
| Emphasize | Cause And Analysis Of Product Bubble |
|---|---|
| Packaging Details | As the customer required |
| Delivery Time | 30day |
| Payment Terms | T/T |
| Supply Ability | More than 1 million |
| Emphasize | Underfilling (or Underforming) |
|---|---|
| Packaging Details | As the customer required |
| Delivery Time | 30day |
| Payment Terms | T/T |
| Supply Ability | More than 1 million |
| Emphasize | Analysis Of The Causes And Countermeasures Of Silver Stripes Or Material Flowers In Products |
|---|---|
| Packaging Details | As the customer required |
| Delivery Time | 30day |
| Payment Terms | T/T |
| Supply Ability | More than 1 million |
